VW 2QD959655Q airbag reset with CG100X programmer.
Airbag Part number:
2QD959655Q
Processor:
R7F7010643 encrypted
Tool to reset airbag: CG100X with D2 adapter.
Here is the wiring diagram/pinout.
Need to remove a capacitor 100nF/0402
Do not extend the wire harness of the D2 adapter.
Honda Civic 2022 (11gen)
Most are locked MCU.
78100 - T21 - A730 - M1
Family: S6J336x
Full chip name: S6J336AHTB
Tips for all S6J chips:
If your Dflash read shows all FFFF, the chip might be encrypted.
How to confirm if the chip is encrypted? Try reading the Pflash.
If Pflash reads successfully but Dflash doesn't, the chip is encrypted.
If neither Pflash nor Dflash reads, you're having a connection issue.
*If MCU is not encrypted, CG100X reads it without problem. If encrypted, it reads all FFF.
How to virgin Mercedes Benz C207 C292 W166 W212 W218 W447 FBS4 Continental DSM using CG FC200 ecu programmer on bench?
Select Mercedes- Continental DSM FBS4 MC9S12XEQ512- Platform mode
Check wiring diagram.
4x 12V
1 GND
CAN-L
CAN-H
Connect FBS4 DSM module with FC200 according to the diagram.
Function
Read Dflash (cannot be used to clone DSM)
Write Dflash
Change VIN
Renew/Reflash
Transfer data
Identify DSM.
It is activated.
Read Dflash to back up data.
Select Renew/Reflash to virgin DSM.
DSM is now renewed.
CGDI K2 released new software 5.4.0.
V5.4.0
Add 4E/47/4A chip copy function.
Add Chrysler 6D64/ Subaru 4E chip generation function.
Optimized some functions and the user experience.
CG FC200 read VAG DELPHI DCM 6.2 ECU in boot mode successfully.
Operation mode: Boot mode.
Read Dflash ok.
Read Pflash ok.
How to reset Kia Sorento 95910-2P000 airbag with CG100 programmer?
Part number: 95910-2P000
Processor: MAC7242
Select Hyundai-95910-2P000 MAC7242 airbag option.
Check wiring diagram.
Connect CG100 with airbag module.
CG70 airbag reset tool update software to V1.2.1.0 version on Sep. 10th, 2025.
V1.2.1.0 Version
1. Added 498 additional airbag models.
2. Added Tesla enter vehicle Service Mode function.
3. Added Tesla(1512876-00-E) Write VIN, Write Configuration, and Erase Configuration functions.
4. Some known problems fixed.
CGDI CG100X now supports airbag crash reset function for Renesas RH850 R7F701A033 airbags.
Here is an example of resetting ChangAn R7F701A033 airbag with CG100X in boot mode.
Part number: 3658100-AM52-AA
Processor: R7F701A033
In CG100X software, search part number: 3658100-AM52-AA- R7F701A033 encrypted.
If you cannot find part number in CG100X software, just search by processor. CG100X can also read processor data and reset airbag crash. There are 4 wiring diagram R7F701A033.
Check wiring diagram.
There are 2 types of airbag pinouts in boot mode.
Method 1 uses D2 adapter and method 2 uses D1 adapter.
With D1 adapter you need to weld a resistor; with D2 adapter, you does not need.
Need to connect 12V power supply to the CG100X device.
Hit Read button to read data.
Read chip ID.
Read Dflash and Pflash data successfully. Save data.
CG100X will ask to repair airbag.
Click Yes to reset airbag crash.
This procedure needs to connect with network and access the server.
Operation completed.
Clear fault code.
CG100X now supports read and write to repair BMW F35 Electronic Steering Column module.
Processor: Renesas V850 D70F3483
This is the module with processor.
Save data. The data combines dflash + pflash full data.
Modify data.
Then write the modified data back to the steering column module.
Finally install the module back to vehicle without programming anymore.
