How to Reset BMW F20 2018 35128WT Mileage by CG pro

How to Reset BMW F20 2018 35128WT Mileage by CG pro?  It shows three modes (1,2,3) which one to modify for mileage?

 

Use mode1
Solder eeprom to 35160 adapter
Read
Save
Change km (starts erase procedure)
Takes a while sometimes need to put hot air on chip for short periods

Use vvdiprog and vvdi2 to reset km on fem.

If dump uses km location in increment area, you can't to do this cg-pro away also another tool can't rewrite increment, best choose new one 35128 or high quality emulator .

If dump does use not increment area ( like v2 ), in here no problem rewrite and for this no need any emulator, also cg-pro and other tool can do this without problem.

image is v1 and v2 eeprom datatype. V2 possible with CG Pro, v1 only possible with yanhua 35xxx simulator. 

 

Possible to read & write 35160WT with CG Pro 9S12?

Question: Anyone tried with CG Pro 9s12 and 35160WT adapter ?

Answer:

I bought it just to try it…
160DOWT without Problems…
160DOWQ without Problems…

Need the Adapter for WT

For 35160WT, you need extra adapter and also to choose in options, you’ll have to connect this adapter on separate port…

Information confirmed by http://www.obdii365.com/wholesale/cg-pro-35106wt-adapter.html

From update log:

Added Dashboard
BMW 35080 V5 (35160WT) (Must use a dedicated 35160WT adapter)

Source: http://www.obdii365.com/wholesale/cg-pro-9s12-freescale-programmer.html

CG Pro is the ONLY Chinese programmer working for 35160WT to read/write.

Here are the ST 35160WT chip list.

All should be done with a dedicated 35160WT adapter.

Chip:ST 35160WT

Microchip PIC18F6520
Microchip PIC18F6720
Microchip PIC18F8520
Microchip PIC18F8620
Microchip PIC18F8720
Microchip PIC12F635
Microchip PIC12F683
Microchip PIC16F631
Microchip PIC16F636
Microchip PIC16F639
Microchip PIC16F677
Microchip PIC16F684
Microchip PIC16F685
Microchip PIC16F687
Microchip PIC16F688
Microchip PIC16F689
Microchip PIC16F690

Dashboard:BMW 35080 V5 (35160WT)

On a side note,

You might be told: VVDI Prog, Xprog, Enigma, Smoke and Cgdiprog can read / write 35160WT

But actually, they can only work for 35160WT read, NOT write.

http://blog.obdii365.com/2018/11/11/cg-pro-read-write-35160wt-eeprom/