(2018.08.06)
1. Add 169 ELV erase and write function;
2. Add check EIS status function；
CGDI MB Prog 2.6.0.0 New Upgrade (2018-06-10)
1. Add ELV Simulator function, support CGMB_ELV one-click unlock, one-click writes the data, one-click reads the password;
2. Add ELV directly write password function, no need to erase the EIS and then synchronize；
3. Add the OBD mileage repair function. Current Support instrument Type:
C(W204)/GLK(X204)/CLK(207)/E(W212)/SLS(197)/CLS(W218),
R-Class(W251)/GL(X164)/ML(W164), E-Class(W211)/CLS(W219),
S-Class(W221)/CL(216), C-Class(W203)/CLK(W209), SLK(R171).
This function needs to be opened separately, such as holding the other equipment of our company (CGDI BMW, CG-Pro), will automatically open (free);
4. Add Gateway EE/FLASH OBD Direct Read and write operations. Current support Gateway type:
C_Class_W204, E_Class_W211, E_Class_W212, CLK_X204, CLK_W207,
SLS_W197, CLS_W218, M_Class_W164, R_Class_W251, SLK_R171,
GL_X164, S_Class_W221, CL_W216.
Note: The 204/212/207/197 gateway type holds the FLASH data the default save size is inconsistent with the actual size, and this type temporarily does not support the OBD write operation, but you can load the CG_MB data using the CG-Pro programmer, select the gateway chip type, and do the gateway FLASH/EE write operation.
This function needs to be opened separately, such as holding the other equipment of our company (CGDI, CG-Pro), will automatically open (free);
5. Add Non-HC05 EIS format file, save the original data type function, one-click to complete the modification of Benz EIS data;
6. Add one-click to clear the fault code function;
7. Fixed the problem that the part BE key is not readable after writing;
8. Fixed the problem that part of the ISM can not erase;
9. Fixed the problem that some EIS data loading error;
10. Add consumption points to calculate key password mode.
Consumption points do not have the device expiration limit, when the device expires, it can still be calculated with consumption points. Points will be in the company launched a variety of activities to be obtained, everyone stay tuned!
CGDI MB Prog 2.5.0.0 Upgrade (2018-03-13)
1. Add ELV repair function, including: enable ELV, virgin ELV (repair damage ELV chip)
2. Add the function of BE key to save file directly
3. Add W205, W218,W166 FBS4 EIS type detection
4. Add save EIS data format flags.
5. Fixed the problem of part of the ECU,TCU,ISM/DSM/ESM cannot erase
6.Fixed the problem of computer data storage restriction
7.Fixed the problem of part of W209, W211 EIS cannot all-lost collection
8. Fixed the problem of the EIS file error caused the data can not upload calculation on EE
New version can renew original NEC mcu now
CGDI MB Prog 2.3.0.0 Upgrade (2017-12-16)
1.Add read, wipe engine computer (ECU) function
2.Add read, wipe gearbox computer (TCU) function
3.Add read, wipe block computer (ISM/DSM/ESM) function
4.Increase support EIS W169 all lost collection
5.Increase support new BE key write function
6.Fixed the problem of the EIS W204 all lost collection error
7.Fixed the problem that part of EIS can not collect data completely when adding key collection
2.Add read, wipe gearbox computer (TCU) function
3.Add read, wipe block computer (ISM/DSM/ESM) function
4.Increase support EIS W169 all lost collection
5.Increase support new BE key write function
6.Fixed the problem of the EIS W204 all lost collection error
7.Fixed the problem that part of EIS can not collect data completely when adding key collection
CGDI MB Prog 2.2.0.0 Upgrade (2017-11-16)
1) Fix bug issue with AKL W204
It seem now the bug is really solved after some users testing for key lost w204. Time collect data still 60 minutes. But password get quickly.
ELV seem also work, but need renew EZS and sync with ELV.
CGDI MB Prog 2.0.0.0 Upgrade (2017-11-11)
1. Calculate the erase password function (including the engine computer, ISM computer, EGS computer, ELV)
2. Calculate the key to enable the password function (you can directly use the disable key)
3. Erase the EIS function (support CAN protocol, K-line protocol)
4 write lock data function
5. Write frame number function
6. Activate the EIS function
7. Clear the TP protection function
8. Calculate the key current track code function
9. Add to determine whether the dealer EIS
10. Fix problems that can cause the program to crash under certain conditions
11. Optimization part pop-up prompt box to enhance the stability of the program
12. increase some tips, the operation experience more accurate
2. Calculate the key to enable the password function (you can directly use the disable key)
3. Erase the EIS function (support CAN protocol, K-line protocol)
4 write lock data function
5. Write frame number function
6. Activate the EIS function
7. Clear the TP protection function
8. Calculate the key current track code function
9. Add to determine whether the dealer EIS
10. Fix problems that can cause the program to crash under certain conditions
11. Optimization part pop-up prompt box to enhance the stability of the program
12. increase some tips, the operation experience more accurate
