CGDI CG70 airbag reset tool released new software version V.1.1.7.0 on April 9th, 2025.
V1.1.7.0
Added 783 Airbag models.
Fix known bugs.
CGDI Prog programmer, CGDI MB, CGDI BMW, CG100, CG Pro etc software download, update and technical support.
CGDI CG70 airbag reset tool released new software version V.1.1.7.0 on April 9th, 2025.
V1.1.7.0
Added 783 Airbag models.
Fix known bugs.
Today we will walk you through 14th-generation Nissan Sylphy 2023 odometer correction using CGDI CG100X programmer. This model features a semi-digital instrument cluster, with an analog tachometer on the left and an LCD screen on the right."
Procedure:
Step 1: Record Original Mileage
Always record the original mileage before disassembly. We recommend taking a photo of the dashboard for reference.
Step 2: Disassemble the Dashboard
1). Remove the 11 rear shell screws securing the instrument cluster.
2). Carefully detach the transparent front cover—avoid excessive force to prevent breaking clips or scratching the panel.
3). Extract the needles—this requires precision.
Step 3: Access the Mainboard
Step 4: Connect CG100X for Mileage Adjustment
3. After verifying the connections, click "Start Operation".
Step 5: Correct mileage.
The process is user-friendly and wizard-guided:
Reading chip data and save backup.
Calculate mileage on server. The operation requires network connection.
The CG100X software has built-in algorithm for this processor. It will automatically analyze mileage data.
Verify mileage data. If the detected mileage is invalid or has a large error, cancel the operation and contact CGDI technical support.
If the data is valid, proceed to enter the new mileage value and confirm.
Writing mileage.
Odometer correction successfully.
Step 6: Finalization
After successful writing, desolder the wires and clean the board. Don't forget to resolder two capacitors back to the board.
Reassemble the dashboard and power it on for verification.
CGDI CG100X adds Mercedes Benz 2019- HU6 (Head Unit 6) instrument cluster (with processor R7F701403 ) mileage correction function in the recent update.
Supports Mercedes A/B-class(W247) 2019-, CLA(W247) 2019-, GLB(W247) 2019-, GLE(W167) 2019-, E-class(W213) 2020- and CLS(W213) 2020- R7F701403 (encrypted) models.
Here obdii365.com will show how to correct MB HU6 cluster mileage with CG100X step by step.
Tools required:
CG100X programmer
CG100X Pro V2 adapter
CG100X D1 adapter
The function requires network connetion.
Record the original mileage before operation. Here it’s 564.1km.
First of all, remove the HU6 instrument module from vehicle. The HU6 module can be divided into 3 types:
A167, A213 and A247.
Check the HU6 cluster location here:
Mercedes HU6 Cluster Location and Steps to Remove for Mileage Correction
Remove and disassemble the HU6 module.
Check the front and back side of the module.
The mileage data is stored in the R7F701403(encrypted) processor.
Select Instrument function-Europe- Mercedes- GLE W167- 2019-R7F701403(encrypted) option and check wiring diagram.
Connect module with cg100x via Pro V2 mcu adapter. Remove 3 capacitors (220nf each) around the processor shown in the wiring diagram.
Also need to connect the D1 adapter (Do not extend the wire harness of the D1 adapter).
Don’t forget to connect DC 12V power supply.
Start operation.
Decrypt chip.
Decrypt chip ID.
Read Dflash and Pflash data.
Then save data.
CG100X has built-in algorithm for HU6 instrument. CG100X will calculate mileage online. It is the same as original mileage.
Input the mileage you desire to change (i.e 2,345km) and write mileage.
Mileage correction finished. Read mileage data again. It shows 2345km. Odometer correction was successful.
Restore the module back to original status. Don’t forget to resolder the 3 capacitors.
http://blog.obdii365.com/2025/04/02/mercedes-hu6-2019-r7f701403-mileage-correction-with-cg100x/
CG100X software update to V1.7.9.0.
1. The instrument mileage function adds 16 vehicle models;
2. The airbag repair function adds 3 vehicle models;
3. The read-write function adds 7 vehicle models.
The following vehicle models are added to the instrument mileage function:
- Proton SAGA 2020- 24C16
- BAIC Xiaohema R5F10DPEJ
- BAIC Weiwang 407EV 2020- 24C16
- Dongfeng Fengshen Haoji 2022- 24C32 (multimedia host)
- Dongfeng Xiaokang K20L 2014- 24C02
- Ford Transit 2021- 24C32
- Sinotruk Hanjiang 2024- 24C02
- Heibao Automobile Heibao H3 2017- 24C02
- Geely Xingzhi 2023- 24C16
- Jianghuai Shuai Ling 2024- 24C16
- Jianghuai Lanmao M1 2023- 24C16
- Jiangling Dadao Pickup 2023- 24C16
- King Long XML6112J16Y Bus 2021- 24C08
- Wuling (Baojun) Bingo (E260) 2023- 24C02
- Changan Oshan Z6 2022- 24C64
- Changan Kaicheng Changan Star 7 2015- 9S12HA32
The following vehicle models are added to the airbag repair function:
- Toyota 89170-60N90 R7F701684 (encrypted)
- Chery 407000380AA J38580874 R7F701009
- XPeng 6590001HA1 R7F701064 (encrypted)
The following vehicle models are added to the read-write function:
- BYD Tang 2018- 93C86 (hybrid) (read-write)
- Dongfeng Fengxing Leiting 2023- 24C32 (multimedia host) (read-write)
- GAC Trumpchi Aion Y 24C32 (read-write)
- GAC Trumpchi GA3S PHEV 2018- R5F10DPJJ (read-write)
- Geely 285010751 AB10A 1300285 95160 (H160) (read-write)
- Roewe 11457893-01 TC224 (read-write)
- Great Wall Haval Dargo 2024- 24C32 multimedia host (read-write)