CG100X Software Update to V1.5.0.0

CG100X Programmer software update to V1.5.0.0. 

V1.5.0.0   NEW

(2024.05.20)

1. Added 32 models to dashboard.

The following models are added for dashboard.
 BEIBEN TRUCK V3ET 2018-2019- 93C86((mileage+time))
 Kawasaki Rare animals 300x 2018- 93C66
 Toyota LEXUs LX570 2015- 93A86
 Toyota LEXUs LS500h 2023- S6J3001
 FOTON S1 158 2023- 24C08
 Geely Xinrui 2023- 24C08
 JieFang J7 2023- 24C16
 JieFang Han V 2021- 24C16
 leijun L3 SPC5606SVLU6
 LOVOL LVdaiji 2023- 24C16(times)
 LINCOLN Navigator 2013- 24C16
 Chery A3 2012- 24C16
 KIA Forte 2021- MB91F061BS
 Roewe IMAX8 EV 2023- 95160(Dashboard)+24C16(BCM)
 XIAgong 55 Digging machine 2011- 24C64(times)
 Lingong JINLILG690 24LC04(times)
 Lingong 955 2021- 9S12HY48(times)
 Subaru FORESTER 2020- 93C86
 T-KNG ouling  jinlika 2021- 24C04
 WuLing Xingchi 2022- 24C16
 WuLing Glorious new card 2020-24C04
 FAWhongta Blue ship T340 24C64
 Iveco IVECO 2022- R5F10xxx
 Iveco CHAOYUE 2021- 25160
 JOHN Deere 1404Tractor R5F10xxx
 ChangAn Chang'an star 9 2021- 9S12HY48
 ChangAn KUAYUEWANG X3 2023- 24C04
 China Hengtian Minibus 9S12HY64
 CNHTC WANGPAI 2017- 93C46
 CNHTC Steyr 93C66
 CNHTC hohan qianchenEC1 2021- 9S12ZVH128
 Zhongxing Pickup Lord  2019- 24C04

 

CG100X VW Tiguan MQB RH850 R7F701407 Mileage Correction

Tutorial: how to correct VAG MQB RH850 R7F701407 (5A Cluster) odometer using CGDI CG100X programmer.

 

It’s a VW Tiguan L 2019. 5C cluster. Cluster number: 5NG 920 650C.

First of all, record original mileage. CG100X will show you a wiring diagram (12V (ON) instrument startup diagram) to activate (power on) instrument cluster.

 

Take a photo of the instrument and the original mileage before disassembling it.

Original mileage: 5000 km

Disassemble cluster carefully

Run CG100X software

Select Europe->VAG MQB->R7F7014xx (Remove Capacitor method)-> R7F701407 (Only 5A cluster)

Verify it is 5A cluster. 5A cluster starts with ‘EM’ on the silkscreen. 5C (starts with ‘PCJ’) is not supported at present. 

Check wiring diagram

You will need a CG100X D1 adapter

The D1 adapter is for D70F34xx D70F35xx R7F7014xx RH850 Mileage Repair without Soldering, No Lift Pin.

Connect CG100X, D1 adapter and cluster following the wiring diagram

Don’t forget to give 12V power supply to the device

Start operation

Chip is encrypted. Decrypting chip. Don’t disconnect device during calculation.

Must save original mileage data. It is very important.

Calculate mileage successfully. CG100X has built-in algorithms. Online calculation requires network connection to access CG server.

 

Check current mileage. Check if the mileage value is correct or has no big difference.

If the mileage is incorrect or has big difference, quit the operation and contact CGDI engineer as soon as possible.

If mileage is correct, enter mileage you desired, i.e 65,454 km

Writing mileage

Mileage correction successfully.

Install instrument cluster.

Check the new mileage

It is fine.

 

http://blog.obdii365.com/2024/05/20/cg100x-vag-mqb-rh850-r7f701407-mileage-correction/

CG100X Software Update to V1.4.9.0

CGDI CG100X programmer released new software version V1.4.9.0.

V1.4.9.0 NEW

(2024.05.11)

1. Added 43 models to dashboard.
2. Added 3 models to read-write.

The following models are added for dashboard.
Aochi X3 2021- 24C04
Boruda DS7 PIC18F45K80
Beijing Zhida X3 2019- 9S12ZVH128(Dashboard)+95320(BCM)
Beijing Q7 24C16(Dash)+95320(BCM)
Benz S Class (W222) 2015- D70F3525
Chenggong LUOTUO E300 R5F10DPXXX
Spring breeze 550 ATV 2013-2015- PIC16F1933
Dayun Dayun DYX12 Truck 2020- FS32K142
DIAO Tractor 24C01
DongFeng Yixuan 24C16
DongFeng Captain 24LC256
DongFeng Changxing D3 MPC56XX
DongFeng Jingyi X5 2013- 24C02
DongFeng Yufeng V9 2021- 93C66
DongFeng Duolika PIC18F66K80 V2
DongFeng Duolika PIC16F946
Fuminpai Electric car 2018- 24C08
Ford LINGYU 2022- 24C32
FOTON Oman Galaxy 24C16
FOTON shidai xiaoka STM8S105C6
FOTON Bus FS32K146
Trumpchi M6 2021- 24C16
Geely Emgrand L FS32K144
JAC Geerfa K3L 24C04
JMC JMMC 25LC1024
KINGLONG Haige 2014- 24LC32
LEVDEO Mangguo 2021- PIC18F46K80
LOVOL lovol Leopard 2204 tractor 25640
Long Xin WUji 500DS 24LC64
Nissan LIVINA 2013- 93C86
Roewe EI5 25160(Dashboard)+24C16(BCM)
Roewe 360 plus 2018- 9S12XHZ256(Dashboard)+24C16(BCM)
RUIlancar Maple leaf60s 2022- FS32K142
SKOKDA XIrui 2015- D70F3524
Tianji EM7 R5F10DSLL
Victoria 150 24C08
Ward Harvester MB91F534B(times)
XINYUAN T23 2023- 24C16
Chevrolet LOVA 2012- 24C08
ChangAn Lantuozhe 2022- 24C64
Great Wall Havel H6 2023- R7F701404
CRRC Era CRRC Electric R7F701404
CNHTC HOWO T3 CAT1023

The following models are added for dashboard read-write.
Honda INSPIRE 2022- 93C86(read write)
Redflag HS7 24C16(head unit)(read write)
Redflag HS5 24C16(head unit)(read write)

CG FC200 Adds DCM7.1A DCM7.1B SID209 SIM2K-341

CG FC200 ecu programmer released new software new version V1.2.0.0 on May 9th, 2024.

 

FC200 V1.2.0.0

1. Added CONTINENTAL type ECU: SID209, SIM2K-341 (ECU)
2. Added BOSCH TC17 ECUs: MINI: MED17.2.2, Ford/MB: DCU17PC01, Hyundai: DCU24, Peugeot: ME17.9.53, BOBCAT: EDC17C87, McLaren: ME17.8.33
3. Added Renesas chip ECU:
Honda: KEIHIN 37820-xxx-xxx SH7058, DELPHI DCM3.7AP_CHINA SH72544
FAW: DENSO TD112700-xxxx SH72530
4. Added Delphi TC2xx ECU: DCM7.1A/DCM7.1B
5. Hyundai: DENSO 33910-05005 adds the function of reading DFlash
6. MED17_China adds a new password-reading function
7. Optimize the verification function of BOSCH/CONTINENTAL/KEFICO/DELPHI TC17 ECUs.

 

How to Change Great Wall D7F701583 Mileage by CG100X?

Most modern vehicles now use large LCD screen. It looks more beautiful, concise, and cool. But it is not easy to disassemble the cluster when calibrating the mileage of the instrument.

The instrument has an LCD display that is easily damaged and has a high risk of damage. But now most LCD instrument models are used as display screens, which do not contain storage chips,

the CPU processors are stored in the radio module or even body control units.  For example, on some Great Wall and BYD vehicles.

 

Here is an example of Great Wall TANK 300 2.0T MY 2023 odometer correction using CG100X programmer.

Record original mileage

Original mileage: 84,334 km

 

Disassemble and remove the Radio module. It is located on the right side of the passenger glove box.

Find and locate CPU chip R7F701583

Then run CG100X software.

Select Instrument function->TANK 300 -> D7F701583

Check wiring diagram

Connect CG100X with radio module following the wiring diagram

Read original mileage.

If the mileage is the same or has small difference as original mileage, continue to change mileage.

If mileage is invalid or has big difference with original km, quit operation.

Here CG100X read the mileage correctly, input mileage you desired, i.e 45,208 km, press YES to continue.

Writing new mileage. Don’t disconnect device during the procedure.

Write mileage completed.

Install radio module back to vehicle.

Check the new mileage. The value is the same as we inputted.

Done.