CG100X now supports read and write to repair BMW F35 Electronic Steering Column module.
Processor: Renesas V850 D70F3483
This is the module with processor.
Save data. The data combines dflash + pflash full data.
Modify data.
Then write the modified data back to the steering column module.
Finally install the module back to vehicle without programming anymore.
CG100X released new software 1.9.3.0 on Sep. 1st, 2025.
CG100X V1.9.3.0
1. Added 12 models to the dashboard.
2. Added 3 models to the airbag.
3. Added 11 models to read-write.
The following models are added for dashboard.
Ankai Bus CAT1025
Geely Geometry EX3 Kung Fu Bull 2022- 24C16
JAC Shuailing V6 2021- 24C16
JieFang Jiefang Hu 6G 9S12HZ128
JinLv Coaster 2019- 24C08
KAIwo Skywell 11-meter Highway Coach 24C02
MG lead 2021- 25160(Dashbpard)+24C16(Body)
NETA V 9S12G64(Dashbpard)+95640(Body)
Chery Tiggo-3XE 24C16
RUIlancar Remarkable blue Maple leaf30X 2020- 24C16
ChangAn Auchan Z6 2024- 24C16
CNHTC CDW Wangpai MB91F53BC
The following models are added for airbag.
Geely A2C16494300 431028 R7F701008
Chery 407000441AA R7F701010
WuLing 24315939 R7F701009
The following models are added for dashboard read-write.
BAIC BJ40C 24C32Dashbpard(Read-Write)+95320(Body)
BYD AUTO BYD destroyer 05 95128(BCM)(read write）
BYD AUTO MRHD-3658100 95128(read write)
BYD AUTO UKEA-3658100A-D1 95128(read write)
Geely 6608142872 AAA252722000 431028 R7F7010093(read write)
TRAUM MEET3 2018- 9S12HY64(read write)
Lan Tu FREED 24C32(Head Unit)(read write)
Leapmotor C11 24C64(Smart cockpit host)(read write)
Roewe 11215310-02 TC224(read write)
Xiao Peng 100091 6590005DF1 R7F7010643(read write)
FAW 8230115-AD01 25320(read write)
CG FC200 ECU programmer released new software V1.3.0.0 on Aug. 29th, 2025.
V1.3.0.0 software adds new ECU protocols, more ‘three readiness monitor not ready ‘, DTC off and VIN modification ECUs.
CG FC200 V1.3.0.0
1.Added New ECU models:
Volkswagen: Marelli 7GV
Saic/Wuling (Platform) : SIM2K-D51, SIM2K-51.4, SCE60
Ssangyong: SIM2K_C201_ECU
Mercedes-benz: DSM MC9S12XEQ512MAL
Peugeot Citroen/Ford/Land Rover/Mazda: SID208
Renault/Dacia: EMS3120
Wuling: SIM2K-34, Eaay_U1 2W
Jianghuai/Wuling: FC-34
Golden Cup (BOOT) : SIM2K-91
Jingbin: KEIHIN 37820-Rxx-xxx MPC5566
2.More ECU types support “Three readiness monitors not ready”:
Hyundai Kia: SIM2K-140, EDC17C57
Volkswagen Audi: MED17.1.27, MED17.1.61, MED17.1.62, SIMOS8.6, MED9.1
Mercedes-Benz: SIM271DE20
Chinese products: MD1CE108, EDC17CV54, EDC17CV53, EDC17CV44, EDC17CV43, MT22.1, MT22.1.1, MG1US008
Wuling: Easy_U3.6, Easy_U2W, Easy_U2.5, EASy_U2W
Geely: Easy_U2
Ford: SID209
Dongfeng/JAC/Isuzu/Deutz: MD1CC878
Suzuki: ME17.9.61, ME17.9.64, ME17.9.6, ME17.9.51, ME17.9.5, MED17.9.63
Baic/Besturn/BYD/Changan /Cirelli/ Dongfeng/FAW/Geely/Great Wall/JAC /Proton/
Trumpchi/Wuling: MG1UA-UP8
Changan: MED17.9.63
3.New models with DTC OFF:
Volkswagen: EDC17CP20, EDC17CP44, ME7.1, ME7.1.1
Ford: SID208, SID209
Mercedes-benz: EDC17CP46, MED9.7, ME9.7
Peugeot Citroen: SID807, SID807EVO, EDC17CP42
Renault: SID307, SID310
Volvo: SID807, SID807EVO
Porsche: SDI 10.X
4.New models with VIN modification:
Ford: EDC17CP65
5.New models with verification:
Dongfeng/JAC/Isuzu/Deutz: MD1CC878
Dongfeng: FC-34
Dongfeng/BAIC/Great Wall/Geely /Cirelle/Proton: MG1UA008
6.Function Optimization:
(1) ECU with “Three readiness monitors not ready”: ME7.4.4, ME7.5, TR40, LEC4A, STC-213
(2) Disable the DTC: Ford_Delphi_DCM_6.1, Hyundai-Kia Bosch EDC16C39, Bosch EDC17C49, VAG Bosch EDC17_CP14, MB_Bosch_EDC17_CP46, BMW Bosch MED17.2, BMW Continental MSD808185, Porsche Continental SDI10.x, VAG Continental SIMOS 12, BMW Bosch MG1CS003, MB Cosch EDC17CP46
Bug fix
1. The issue where some Easy_U2W cannot write data
2. Optimize the failure issue of the AP reading in Mahindra 7.1
3. Optimize the function of disabling DTC in some ECUs.
CGDI A2 key programmer released new IMMO software 022 on Aug. 26th, 2025.
1. Adds Mercedes Benz switch key frequency, points recharge, key points collection and exchange functions.
2. Add BMW G series BDC2 module replacement/cloning function.
What key can be used with CGDI Prog MB key programmer?
Here is the clue.
CGDI MB doesn’t force you to buy or use CGDI MB keys with that device.
You can use Xhorse BE keys (with green or yellow board). Never had problems with that combination.
You can use also used Benz keys to reset them and program them. Tested many times and it works.
You can use also aftermarket Benz keys. They also working.
Only thing is to buy FBS3 keyless keys from CGDI MB if you’re doing keyless cars.
Keep in mind that keyless keys sometimes can make issues.
Problem:
Try to reset the password in CG FC200, it showed an error 0602 and said the account does not exist. How did you resolve the FC200 connectivity issue?
Solution:
First close the FC200 software, and download from their website the latest fc200 app.
Then install.
Start the software.
Then go to Settings on the top right, and change language and server.
Restart the FC200 app.
If there isn’t any update, try to bind / register again.
Follow this guide to register and bind FC200.
How to do latest Hyundai/Kia MEG17.9.2 ECU IMMO OFF? Here takes CG FC200 as an example.
1. Read the ECU Data.
Run FC200 Software. Select Bosch MEG17.9.2 ECU for Hyundai.
Check boot mode wiring diargam. Have to connect 2 GPT-0 and 1 GPT-1 boot pin.
Connect FC200 with ECU according to the wiring diagram.
Identify ECU.
Read password.
If failed to read password automatically. Select type as Kia/Hyundai/Honda/Suzuki TPROT8+.
Because diffrent ECUs have different ways to obtain the password.
Read and save password.
Read password successfully.
Now start reading Dflash.
Read Dflash and save.
Read and save Pflash.
2. Modify the original Pflash data to disable IMMO
Use a hex editor or specialized tuning software (e.g., WinOLS, ECU Titanium, IMMO Doctor etc).
Locate immobilizer-related (here upload Pflash) data and disable or remove it.
This can involve:
Removing or zeroing the immobilizer code.
Adjusting specific flags or checksum values.
3. Write the modified file back to the ECU
Use the same tool (CG FC200) you used to read.
Flash the IMMO OFF file back to the ECU..
Hit Yes to verify the file.
FC200 asks password to write file.
Select Password or original file loading and upload password file we read in step 1.
Write immo off file until completed.
After the version 1.2.9.4 update, if you don’t log in or bind the CG FC200 programmer, you won’t be able to use the software. We’ll explain how to register an account and how to recover your password if you have one but can’t remember it.
CG FC-200 Account Registration Guide:
Open the software version 1.2.9.4, and it will ask you to log in to an account.
If you registered one before, fill in the login information directly.
After login, hit “binding device” and select the CG FC200 to bind.
Bind device successfully. Now you can use the FC200 software.
If you don’t have an account, hit Register for an account.
If you forget the login password, hit “retrieve password”, then reset password via phone number or email.
NOTE:
All CG Series products share a universal account system—one registration allows login across all devices.
You can look up bound accounts using the device S/N or check if a phone number is already registered.
