Will CG FC200 programmer clone VAG DCM6.2V ECU? Here is a real user review.
“Ordered an FC200 to work on a VAG Delphi DCM6.2V.
The goal is to clone the old one or set the used ECU (used ECU that is currently locked) to immo off, because the original one is defective.
FC200 can read in boot mode, but no Immo off function.
Is cloning generally possible with the FC200?
Give it a try and check whether it works or not.
It’s done.
Cloning with FC200 worked perfectly!
Follow the steps below:
OLD ECU Backup
1. Read password and save file.
2. Press Connect and use the saved password file.
2. Read software (PFLASH) and save.
NEW ECU Backup
1. Read password and save file.
2. Press Connect and use the saved password file.
2. Read software (PFLASH) and save.
Final: Write software (PFLASH file) from OLD ECU.
Everything was transferred from the OLD ECU to the NEW ECU. The car started right away.
The software offers a verification function before writing (online process). This is the checksum, the checksum was correctly.
